When you’d like to liven up a garment, accessory, luggage piece or even hats you can sew on badges to achieve the fresh look easily. Badges or patches when placed strategically can immediately alter the look of a garment or accessory and take it from boring to spunky within just a few minutes. If you have children and they keep earning badges of merit you would like to sew them on. However, as intimidating as it might sound, sewing on badges isn’t very difficult once you know how you can do it.
To start off this approach to sewing on a badge, start with placing the badge over the place where you desire it. Now secure the badge well with some pins so that it www.dogtransfer.com stays in place and doesn’t shift when you are sewing it on. Now if you’re putting the patch on a garment, you need to fix the patch and after that try the garment on to make sure that the patch or the badge looks right in the place. If your patch needs a little readjustment you can do it at this time easily.
Now thread the needle ensuring that the thread that you’re using isn’t very long. Maintain the thread within a length of approximately 18inches for quick maneuvering. If your thread is way too long then you might get bothered by knots. When you’ve the thread ready make a knot at the end of the thread. It is possible to thread a needle manually by holding the non knotted end in between your forefinger and thumb after which passing it in the eye of your needle. You may as well get the aid of a needle threader if you find threading a needle this way difficult.
Pass the needle through the badge and also the fabric making sure that the knot is on the wrong side of the patch. Leave a space of 1/8th of an inch from where you began stitching keeping this distance from your last stitch constantly. Continue stitching round the entire perimeter of the badge until you have completed stitching it all the way through. Now knot the thread on the underside of the patch by looping your thread by using a single stitch. Pull the thread strongly to secure the knot and then cut-off any excess thread that is left. Lastly remove the extra safety pins that you were using to secure the patch into position.
You can also sew on badges with the help of a sewing machine if you don’t wish to do the same yourself. Pick a thread that matched the hue of the patch after which you can tread your machine. You could also pick out a contrasting color depending on the look which you want to give your badge. Once this is achieved you should start sewing you badge. Makes use of the top of the badge for your starting place and sew all along the edge of your badge using the regular stitch mode ending in your beginning point. Once done, cut any additional thread that connects the badge to the machine and your garment is ready for use with the badge.